Introduction to the drilling and tapping machine:
The drilling and tapping machine is a machine tool for drilling and tapping valves and flanges.Since it is used for drilling and tapping valves and flanges,the machine tool has two stations.One station is used for drilling and the other for tapping.The valve body does not move during the processing to protect the processing accuracy of the workpiece.Improved work efficiency.
Features of the drilling and tapping machine:
1.The machine tool is suitable for processing various valves and pipe fittings.
2.The machine tool uses a cross coupling to drive the spline shaft,and the drill rod position adjustment range is large.The machine tool can process products with multiple threaded holes on the same plane such as the valve center.
3.Good processing efficiency.During the processing,the machine tool uses the No.1 power head to feed longitudinally to complete the drilling process of the threaded bottom hole.The workpiece is moved from the horizontal workbench to the excellent station,and the No.2 power head feeds longitudinally to complete the thread tapping process.The time required is 1-2 minutes.
4.Reduce labor.Traditional tapping requires two processes,namely drilling the thread bottom hole and tapping,and the use of abrasives to process one hole at a time,which wastes time.This machine tool can complete the drilling and tapping of multiple holes in one clamping,with good work efficiency.
5.The processing size is highly uniform.After the adjustment is completed,you only need to clamp the workpiece to cycle through the drilling and tapping work.
6.Simple operation
